Marvel Spartan 66 Ton Ironworker Press Brake Attachment Tooling IDW 66D

$12,500 (USD)

New Hope, MN

orCall 612-747-6130


Here is a nice running Spartan 66 Ton Iron Worker. This Machine can be inspected under power in Mpls Mn. To Set up an inspection, please contact us. Thank you.

Note: We will load on your carrier.


Spartan Marvel 66 Ton Hyd Ironworker
This Machine comes with Alot of tooling,

10” Brake, Multiple Punches and Dies Etc.

General Specifications: (All specifications must be verified by buyer)

Make: Marvel Spartan

Model: IW66D

Serial # IW66D-152
Punch Pressure: 66 tons.
Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper: For fast and
easy setup.
Die Holder: Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling: 1-1/2” in 3/8” material.
Large Tooling: 2” in 5/16” material.
CPD Series: SP51P punch, SP80D die.
Optional Oversize Tooling: 6” in 3/32” material.
Maximum Channel Flange: 7”.
Throat Depth: 12” (D); 20” (DX).

Stroke Length: 3-15/16”.
Cycles per Minute in 3/4”: 30.
Punching Station Work Height: 39-3/4”.
Flat Bar Shear Capacity: 14” in 9/16”.
Maximum Width x Thickness: 10” in 3/4”.
Lower Blade: Four (4) usable edges.
Support Table: Includes guides for accurate positioning and
indicator lines at 30 and 45 degrees left and right.
Adjustable Hold-Down: Holds work piece securely in position
when shearing.
Upper Shear Blade: Provides for minimum distortion. Two (2)
usable edges.
Blade Length: 14-1/4”.
Angle Flange Trim: 4”
Flat Bar Shear Work Height: 36”.
Maximum Capacity – 90 degrees: 5” x 5” x 1/2”.
Maximum Capacity – 45 degrees: 2-1/2” x 2-1/2” x 5/16”.
Shearing with no material loss and minimum deformity.
Shear Blades: Four (4) usable edges.
Angle Shear Work Height: 43-3/4”.
Round Bar Max. Capacity: 1-1/2”.
Square Bar Max. Capacity: 1-1/2” x 1-1/2”.
Five Cavity Round and Square Bar Shear Sizes:
Round 1/2”, 1”, 1-1/2”
Square 3/4”, 1-1/2”.
Channel Shear Max. (optional): 5”.
-Beam Shear Max. (optional): 5”.
Bar Shear Work Height: 48”.
Rectangular Notcher: 2” x 3-1/2” in 5/16” material.
Electrical Interlock Safety Guard
Gauge Table with Stops: For precise positioning.
Notcher Work Height: 36-1/4”.
Magnetic Base Work Light

Adjustable Electric Back Gauge (36”)

24 Volt DC Control Voltage

Scrap Boxes at Punching and Notching Stations

Adjustable Stroke Depth at Punch

Full-Control Foot Pedals (2)

Two (2) Piece Gauging Table at Punch Station

Keyed Punch Holder for Shaped Tooling

Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz

Machine Currently Wired 230 Volt 3 Phase 20.5 Full Load Amp

Machine Net Weight: 3,969 lbs.

Machine Dimensions: (D) 68” L X31” W X67”

Price Loaded on your Carrier.......................................$12,500.00 sold as is as inspected


ManufacturerMarvel Spartan 66 Ton Ironworker Press Brake Attachment Tooling
ModelIDW 66D
Serial NumberSerial # IW66D-152